High Safety Packaging Drop Test Equipment , Free Fall Drop Tester
Drop Test Equipment Uses:
packing drop test machine/drop test instrument/package drop test equipment can determine the ultimate dimension in drop testing and incline impact testing for product and package performance which uses as reference to improve the packing. Special fixtures are available to allow for corner and edge drops.
Drop Test Equipment Specifications:
| Model | TZ-HG1500 Drop Test Equipment |
| Height range | 300~1500mm |
| Height display | digital |
| Drop height error | ±10mm |
| The maximum weight of the product | 60Kg |
| The maximum size of the product | 1000×800×1000mm |
| Impact panel size | 1600×1100×20mm |
| The appearance of the machine | 1600×1100×2230mm |
| The size of the control box | 300×350×1100mm |
| Drop mode | surface, edge, Angle |
| The motor power | 1.1KW |
| Net weight | 600 kg |
Drop Test Equipment Features:
- equipped with digital display height display and decoder for height tracking, so as to accurately give the drop height of the product, the error from the preset drop height is no more than 2% or 10mm.
- Motor fault protection, high and low limit protection, emergency stop protection
Ista-1a /2A external tank drop test
Drop test of external container, usually using ista-1a or 2A standard established by iata.Most customers will choose the standard of 1A for testing. The test procedure of 1A and 2A is basically the same, but the drop height will be different.
Drop test procedure
1. First, check the product to make sure that the product being tested is a good product, including appearance and function.
2. Repackage to the original packing state, including the packing belt of the outer case (if any).
3. Choose the right floor, which must be smooth and hard.Such as concrete floor, iron plate, etc.
4. Test in the following order:
| Test Sequence | Parts | Specific Surface, Angle, edge |
| 1 | Angle | for the most vulnerable Angle. If not, test for 2-3-5 |
| 2 | edge | shortest side of the adjacent test Angle |
| 3 | edge | next longest side of the adjacent test Angle |
| 4 | edge | longest side of the adjacent test Angle |
| 5 | surface | minimum surface |
| 6 | surface | Relative minimum surface |
| 7 | surface | A small plane |
| 8 | surface | Relatively minor surface |
| 9 | surface | The bedding face |
| 10 | surface | Relative maximum |
Details
Product Tags:
|
|
High Safety Packaging Drop Test Equipment , Free Fall Drop Tester Images
|
